📲 Kiwi VoIP – How to Insert Your SIM Card

Setting up your Kiwi VoIP mobile service starts with inserting your new SIM card. Here’s a simple step-by-step guide to help you install your physical SIM into your phone.

🛠️ What You’ll Need:

• Your Kiwi VoIP SIM card

• The SIM ejector pin (included in your SIM pack or with your phone)

• A clean, flat surface

🚀 Steps to Insert Your SIM

1. Find your SIM tray
   It’s usually located on the side, top, or bottom of your phone.

2. Insert the SIM pin
   Gently press the SIM pin into the small hole next to the SIM tray. You may need to apply a little pressure.

3. Remove the tray
   The tray will pop out slightly — carefully pull it all the way out.

4. Swap the SIM
   Remove your old SIM (if there is one) and place your Kiwi VoIP SIM into the tray. Make sure it’s aligned correctly.

5. Slide the tray back in
   Push the tray back into the phone until it clicks and sits flush with the edge.

💡 If you’re using an older phone, the SIM card slot may be located under the battery — remove the back cover to access it.

📘 Need Help?

If you're unsure about your phone model, refer to your user guide or search online for model-specific instructions.